Architectural glass limited warranty

MILLET Glass Industry® manufacturer of Architectural glass extend this limited warranty only to its immediate customer for a period of (10) ten years from the manufactured after the effective date (1), subject to the terms and conditions of this limited warranty for MILLET products listed bellow:

 

TEMPERED AND HEAT STRENGTHENED GLASS

MILLET limited warranty that the tempered and heat strengthened glass is warranted to have been manufactured as applicable to meet the requirements of ASTM C1048 for a period of ten (10) years from the date of manufacture under normal conditions.

MILLET´s tempered glass is certified thorough the Safety Glass Certification Council (SGCC®) to ANSI Z 97.1 and CPSC 16 CFR 1201 known as composite certification or both standards with CAN/CGSB 12.1. (Maximum size U / ANSI CLASS A)

 

CERAMIC COATED GLASS BY DIGITAL CERAMIC INK DIGITAL PRINT, CERAMIC FRIT SILKSCREENED AND SPANDREL GLASS

MILLET limited warranty that the ceramic coated glass by digital ceramic ink digital print, ceramic frit silkscreened and spandrel glass are warranted to have been manufactured as applicable to meet the requirements of ASTM C1048 for a period of ten (10) years from date of manufacture under normal conditions.

 

COATED GLASS PRODUCTS

MILLET limited warranty that the coated glass products glass is warranted to have been manufactured as applicable to meet the requirements of ASTM C1376 for a period of ten (10) years from date of manufacture under normal conditions.

 

INSULATING GLASS UNIT (DUAL SEAL UNIT)

MILLET limited warranty that the insulating glass unit, (dual sealed with a primary seal of polyisobutylene or Ködispace 4SG Spacer System and a secondary seal of silicone) is warranted to have been manufactured as applicable to meet the requirements of ASTM E2190 for a period of ten (10) years from date of manufacture under normal conditions.


MILLET´s insulating glass units are certified thorough the Insulating Glass Certification Council (IGCC®) to ASTM E2190 in accordance with ASTM E2188 and ASTM E2189

 LAMINATED GLASS (PVB Interlayer)

MILLET limited warranty that the laminated glass is warranted to have been manufactured as applicable to meet the requirements of ASTM C1172 for a period of five (5) years from the date of manufacture under normal conditions.

MILLET´s laminated glass is certified thorough the Safety Glass Certification Council (SGCC®) to ANSI Z 97.1 and

CPSC 16 CFR 1201 known as composite certification or both standards with CAN/CGSB 12.1. (Maximum size U / ANSI CLASS A)

 

LAMINATED GLASS (SentryGlas™ Interlayer)

MILLET limited warranty that the laminated glass is warranted to have been manufactured as applicable to meet the requirements of ASTM C1172 for a period of ten (10) years from the date of manufacture under normal conditions.

MILLET´s laminated glass is certified thorough the Safety Glass Certification Council (SGCC®) to ANSI Z 97.1 and

CPSC 16 CFR 1201 known as composite certification or both standards with CAN/CGSB 12.1. (Maximum size U / ANSI CLASS A)


 

(1) MILLET Limited Warranty does not cover (product or process) heat soaking of tempered glass.

 



DISCLAIMERS, EXCLUSIONS, LIMITATIONS, AND ADDITIONAL TERMS AND CONDITIONS APPLICABLE TO MILLET’S  LIMITED  WARRANTY

 

In the event that a MILLET product is found and verified by MILLET to be defective under the Limited Warranty, MILLET will replace the product without charge, FOB nearest shipping point to the place of installation or, at MILLET’s option, refund the purchase price of the glass. In no event will MILLET’s liability exceed the purchase price of the glass. If MILLET elects to replace the defective glass, MILLET will not be liable for any other expenses, including but not limited to, removal of the defective unit, installation of replacement units, any labor, materials, and/or any other damages, including incidental, indirect, special, or consequential damages. Further, the warranty of the replacement glass will be limited to the remainder of the warranty period of the original glass.

 

MILLET expressly assumes no responsibility for and MILLET’s Limited Warranty does not cover the following: glass breakage, product failure due to improper usage; product failure due to improper handling, loading, unloading or storage; incompatibility with other glazing or installation materials, including but not limited to, coatings, sealants, gaskets, setting blocks, lubricants, insulation or any other materials; faulty installation or building construction; damage caused by water not attributable to the MILLET product; failure to adhere to GANA’s instructions regarding installation and/or maintenance of the unit, including written proof of routine maintenance (consult Glass Association of North America Glazing Manual); improper design; errors in provided specifications; scratches or abrasions to the product; abnormal weather conditions; failure of products due to severe and/or extreme weather conditions including, but not limited to: hurricanes, tornadoes, earthquakes, hail, excessive heat, cold or humidity; or damage caused by cleaners, solvents, acids, alkalies or any other chemicals used on or around the products. MILLET reserves the right to inspect, in the field, any MILLET product that is alleged to be defective.



The purchaser’s exclusive remedy is limited to the legal remedies described in MILLET’s Limited Warranty. MILLET will not be liable for any incidental or consequential damages of any kind. MILLET’s Limited Warranty will be void in the event that full payment is not received for goods and services within the agreed upon terms of sale. MILLET MAKES NO OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, REGARDING THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

 

This warranty shall apply only if Customer notifies MILLET of the claim in writing to the commercial executive within thirty (30) days of detection of the defect covered by this warranty and provides the following information:


• Detailed written claim, including invoice and code that appears on the face glass products



• Physical sample of the claimed situation



• Any other information required by MILLET to determine that the product is covered by this limited warranty.



In the event that the glass product fails to conform to the MILLET limited warranty described above, and if MILLET is notified, in writing, of such failure during the warranty period, then MILLET will, at its option, replace the defective product under the same terms and conditions as the original shipment.



In no event shall MILLET nor any of its affiliates or authorized representatives be liable to its immediate customer or any third party as a result of the sale or use of glass product, including but not limited to loss, direct, indirect, incidental or consequential damages, or expenses arising out of the installation or removal caused by the defective product.



Except for the express warranty described above, there are no express or implied warranties of any kind and there are no warranties of merchantability or fitness for a particular purpose with respect to the glass product or any part or component thereof and no warranty shall be implied by operation of law or otherwise.

 


Responsive img